1.6 Memory Dialling Features
60 Feature Guide
1.6.1.7 Hot Line
Description
A single line telephone (SLT) user can make an outgoing call to a previously stored telephone number (up
to 32 digits) simply by going off-hook. If the Hot Line feature is set and the user goes off-hook, a special dial
tone (dial tone 2) is generated for a preprogrammed time period ( Hot Line Waiting Time [203]), and then
dialling starts. During this waiting time, the user can dial another party, overriding the Hot Line feature.
This feature is also known as Pickup Dialling.
Conditions
• This feature cannot be programmed on rotary SLTs.
• This feature will not function when the extension user goes off-hook to answer an incoming call or
retrieve a call on hold.
User Manual References
1.2.2 Easy Dialling
To Next Page
Loading...
