Panasonic KX-TEM824 - System Data Control; PC Programming

2.3 System Data Control
Feature Guide 169
2.3 System Data Control
2.3.1 PC Programming
Description
System programming settings can be accessed using a PC and the Panasonic KX-TE Maintenance
Console software as well as by using a proprietary telephone (PT) ( 2.3.2 PT Programming). System
programming and data upload/download can be performed either through on-site programming or remote
programming.
1. On-site Programming: Programming that is performed using an on-site PC connected directly to
the PBX.
2. Remote Programming: Programming that is performed using an off-site PC that connects to the
PBX via an outside (CO) line.
1. Connection Methods for On-site Programming
Method Description Required Hardware
Serial Interface (RS-
232C port)
The PC is connected to the PBX via the Serial
Interface (RS-232C port) of the PBX.
—
USB The PC is connected to the PBX via the USB port
of the PBX.
—