Panasonic KX-TEM824 - Page 168

2.2 System Configuration—Software
168 Feature Guide
Operator Call
An extension user can call the operator by entering the Operator Call number ( Automatic Line Access
[121]), often simply, "0". If no operator is assigned, the caller will hear a reorder tone. If the Automatic Line
Access number is assigned to "0" through system programming, the Operator Call number will be changed
to "9".
Note
For New Zealand, the Automatic Line Access number may be either 1 or 9.
User Manual References
1.2.1 Basic Calling
2.1 Control Features
3.2.2 Viewing, Printing, and Clearing Call Logs
Incoming Call Log Display Lock in
the Common Area
Locks or unlocks the
Incoming Call Log for the
common area.
Not required • 1.8.3 Extension
Lock
• 1.16.2 Incoming
Call Log
301st Incoming Call Logged in the
Common Area
Selects how new calls are
treated when Incoming Call
Log for the common area is
full.
Not required • 1.16.2 Incoming
Call Log
Outgoing Message (OGM) for
DISA/UCD
Records and plays back
OGMs used by DISA,
Uniform Call Distribution
(UCD), and 3-level
Automated Attendant (AA). 
Erases OGMs used by
DISA and UCD.
Not required • 1.15.5 Outgoing
Message (OGM)
for DISA/UCD
Date and Time Setting Adjusts the current date
and time.
Not required –
Extension Lock—CANCEL ALL Cancels Extension Lock at
all extensions.
Not required • 1.8.3 Extension
Lock
LCS Password Control Clears the Live Call
Screening (LCS) password.
Not required • 1.19.1 Voice
Mail APT
Integration
Common BV OGM Records, plays back, and
erases a common BV OGM
in the common message
area that can be accessed
by either the operator or
manager.
Not required • 1.15.7 Built-in
Voice Message
(BV)
* The system password may be entered instead of the extension password for the manager (manager
password).
Feature Description
Manager
Password*
Details in