Panasonic KX-TEM824 - Doorphone Chime Pattern [712]; SMDR RS-232 C Parameter [800]

3.3 PT Programming
248 Feature Guide
Doorphone Chime Pattern [712]
Feature & Programming References
1.15.3 Doorbell/Door Chime
4.2.1 Tones/Ring Tones
SMDR RS-232C Parameter [800]
Notes
• * Select "None" when the printer does not require error checking.
• The following combinations are invalid.
If any of the above invalid combinations are selected, an alarm tone will be heard.
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
Parity Word length Stop bit length
Mark 8 2
Space 8 1
Space 8 2
7 1 2
NEXT
doorphone no. name*
STORE END
(1
…
4/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Pattern1
…
8)
8 0 0
NEXT
(CR+LF/CR) (1200/2400/
4800/9600 B)
(Mark/Space/
Even/Odd/
None*)
(1 bit/2 bits)(7/8 bits)
END
SELECT STORE NEXT SELECT STORE
NEXT SELECT STORE NEXT SELECT STORE NEXT SELECT STORE
<Select the new line code> <Select the baud rate>
<Select the parity><Select the word length> <Select the stop bit length>
CR: Carriage Return
LF: Line Feed