Panasonic KX-TEM824 - CO Line Ring Tone Pattern [423]; Polarity Reverse Detection [424]

3.3 PT Programming
Feature Guide 225
Notes
• * The disconnect signal lengths that can be selected depend on your country/area as follows: 
For United Kingdom: 0.5 s, 2.0 s, 4.0 s
For South Africa: 0.8 s, 1.5 s, 4.0 s
For Others: 0.5 s, 1.5 s, 4.0 s
• The time you select must be longer than the requirements of your telephone company or host PBX.
Feature & Programming References
1.10.6 Flash/Recall
CO Line Ring Tone Pattern [423]
Note
It is recommended that you set a different ring tone pattern from the ring tone patterns specified in
Extension Ring Tone Pattern [115] and Doorphone Ring Tone Pattern [706].
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
Polarity Reverse Detection [424]
Feature & Programming References
1.5.2.5 Reverse Circuit
4 2 3
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Single/Double/
Triple)
4 2 4
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)