EasyManua.ls Logo

Panasonic KX-TEM824 - Page 151

Panasonic KX-TEM824
271 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.20 Administrative Information Output Features
Feature Guide 151
(5) Dial Number [Outside (CO) Line Call]
Outgoing Outside (CO) Line Call
Shows the dialled telephone number (max. 32 digits). Digits
shown are as follows:
0 through 9,,#, - (hyphen)
F/: Flash/recall signal ( 1.10.6 Flash/Recall)
=: Host PBX Access code marker ( 1.5.2.7 Host PBX
Access Code (Access Code to the Telephone Company from
a Host PBX)) The marker is displayed between the Host PBX
Access code and the dialled number when a Host PBX Access
code is entered.
. (dot): Secret Dialling
Incoming Outside (CO) Line Call
Shows <incoming> + the caller's telephone number (max. 16
digits). A caller's telephone number is displayed only when an
optional Caller ID card is installed and "With CID" is selected
in Caller ID SMDR Format [906]. It is also possible to show a
caller's telephone number before the call is answered (
Caller ID SMDR Printout [907]).
Also shows the following codes:
<DISA incoming> + the caller's telephone number (max. 16
digits): Incoming outside (CO) line call via the DISA feature
<BV incoming>: Incoming outside (CO) line call to the
common message area of the BV feature
<DIL incoming>: Incoming outside (CO) line call via the DIL
feature ( 1.1.1.1 Direct In Line (DIL))
<UCD waiting>: Incoming outside (CO) line call via the UCD
feature ( 1.2.2 Uniform Call Distribution (UCD))
When the UCD waiting call is answered, a new record is
started.
(6) Duration Shows the duration of the outside (CO) line call or the UCD call
waiting time in hours/minutes/seconds.
(7) Code Shows the account code appended to the call ( 1.5.2.3
Account Code Entry), the account code index number (e.g.,
13), the number of the extension that used the Walking COS
feature (e.g., 101), or DISA security code status (e.g., 0).
0: A DISA incoming call without a DISA security code
1 to 4: A DISA incoming call with a DISA security code number
Actual DISA security codes are not printed by SMDR ( DISA
Security Code [512]).
Section Number Data Description

Table of Contents

Other manuals for Panasonic KX-TEM824

Related product manuals