Panasonic KX-TEM824 - Page 178

2.3 System Data Control
178 Feature Guide
2. Feature Numbering (available while a busy, DND, or ringback tone is heard)
Features that are available while a busy, DND, or ringback tone is heard have fixed numbers, as shown
in the following table:

[Feature Numbering Table (available while a busy, DND, or ringback tone is heard)]
Personal BV OGM (record/play/erase) 723 (1/2/0) + #/0
Personal Speed Dialling (confirm)
3
0–9 + #
Personal Speed Dialling (dial)
1 or # 1 or ##
0–9
Personal Speed Dialling (programme)
2
0–9 + phone no. + #
Remote Maintenance 729
Remote Timed Reminder (set/cancel/
confirm)
764 extn. no. + # + 76 +
([hhmm +
parameter]
*4
/2/3) + #
Room Monitor (set/cancel) 735 (1/0) + #
Room Monitor through a doorphone 31 #31 1–4
System Speed Dialling for an SLT (dial) 00–99
Timed Reminder (set/cancel) 76 ([hhmm +
parameter]
*4
/2) + #/0
Timed Reminder (confirm) 76 3 + #
Time Service (set/cancel) 78 ([1–3]/0) + #
Walking COS
7
extn. password + the
user's extn. no. + #/0
21st Incoming Call Logged in the Personal
Area (disregard the newest call/overwrite
the oldest call)
737 (0/1) + #
301st Incoming Call Logged in the Common
Area (disregard the newest call/overwrite
the oldest call)
737 (2/3) + #
*1
For New Zealand: 1 or 9
*2
For United Kingdom/New Zealand: Plan 1: 36/56; Plan 2/Plan 3: #36/#56
*3
For United Kingdom/New Zealand: Plan 1: 200–299; for New Zealand: Plan 2: 200–499, Plan 3: 20–49
*4
hh: hour (01–12), mm: minute (00–59), AM/PM (0/1), one time/daily (1/2)
Feature Numbering
Automatic Callback Busy 6
Busy Station Signalling (BSS)/DND Override 2
Executive Busy Override 3
Feature
Numbering
Additional Number
Plan 1 Plan 2 Plan 3