Panasonic KX-TEM824 - Page 189

3.3 PT Programming
Feature Guide 189
Entering System Programming Mode
Using a PT to perform system programming allows an authorised administrator to set a wide range of PBX
features and parameters. To enter system programming mode, the system password is required. With the
system password, all system programming is accessible.
Note
means default value throughout these programming instructions.
Entering Manager Programming Mode
Using a PT to perform manager programming allows the manager extension (extension jack 01) to set
certain PBX features and parameters. To enter manager programming mode, the extension password for
the manager (manager password) is required.

With the manager password, the following 4 system programming settings are accessible:
• System Speed Dialling Number [001]
• System Speed Dialling Name [011]
• DISA Security Code [512]
• DISA Security Code Digits [530]
Notes
• The system password may be entered instead of the manager password.
• With the manager password, the manager can also set a password to each extension, and print
out call log information for each extension. For more information on how to assign a password to
each extension including the manager password and to print out call log information for each
extension, refer to the User Manual ( 2.1.7 Changing System Settings Using Programming
Mode, 3.2.2 Viewing, Printing, and Clearing Call Logs).
FLASH
CLEAR
Fixed Button (KX-T7730/KX-T7735) Function
PROGRAM
#
System Password for
Administrator—for PT Programming
Programming No.
3 digits
1234
Programming No.
3 digits
Extension Password for Manager
—for PT Programming
PROGRAM
#