113
SQW0419
Picture Quality and coloring Settings
Adjusting the picture quality with effects
[Photo Style]
Recording mode:
You can adjust the colors and picture quality according to the concept of the picture that
you want to create.
→ [Rec] → [Photo Style]
[Standard] Standard setting.
[Vivid]
*
1
Setting with slightly high contrast and saturation.
[Natural]
*
1
Setting with slightly low contrast.
[Monochrome]
Setting that creates a picture using monochrome shades of gray only,
such as black and white.
[Scenery]
*
1
Setting that creates a picture using vivid colors for the blue sky and
green.
[Portrait]
*
1
Setting that produces the look of a healthy complexion.
[Custom]
*
1
Setting for using colors and picture quality that were registered in
advance.
[Cinelike D]
*
2
Gives priority to the dynamic range by using a gamma curve
*
3
designed to create film-like images. Suited for editing.
[Cinelike V]
*
2
Gives priority to the contrast by using a gamma curve
*
3
designed to
create film-like images.
*
1
This setting is not available in Intelligent Auto Plus Mode.
*
2
You can use this function only in Creative Video Mode.
*
3
When the actual brightness and the brightness to be captured are adjusted at each brightness level,
the relationship between these two kinds of brightness is plotted as a nonlinear curve. This is called
the gamma curve.
●
In Intelligent Auto Plus Mode, the setting will be reset to [Standard] when the camera is switched
to another Recording mode or this unit is turned on and off.
●
Only picture quality adjustment can be set in the Scene Guide Mode.
To Next Page
Loading...
