320
SQW0419
Others
Optional accessories
Filter (optional)
PL filter (DMW-LPL52: optional) will suppress the reflected light from a metal or non
spherical surfaces (flat non-metallic surfaces, water vapor or invisible particles in the air),
making it possible to take a picture with enhanced contrast.
The ND filter (DMW-LND52: optional) reduces the amount of light to approximately 1/8th
(equal to adjusting the aperture value 3 increments) without affecting the color balance.
The MC protector (DMW-LMC52: optional) is a transparent filter which affects neither the
colors nor the amount of light, so it can always be used to protect the camera’s lens.
●
Do not attach multiple filters at the same time.
●
If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
●
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
camera.
●
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus
may be adjusted to the lens, resulting in the subject being out of focus.
●
Refer to the operating instructions for each filter for details.
To Next Page
Loading...
