160
SQW0419
Shutter and Drive Settings
Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [ ] button ( )
2
Press to select the drive mode and
press [MENU/SET]
Drive Mode
[Single] When the shutter button is pressed, only one picture is recorded.
[Burst] (→161)
The pictures are recorded in succession while the shutter button is
pressed.
[4K PHOTO]
(→164)
When the shutter button is pressed, a 4K photo is recorded.
[Auto Bracket]
*
(→178)
Each time the shutter button is pressed, the pictures are
recorded with different exposure settings based on the Exposure
Compensation range.
[Self Timer]
(→180)
When the shutter button is pressed, recording takes place after the
set time has elapsed.
*
Cannot be set when using Intelligent Auto Mode.
• To cancel drive mode, select [ ] ([Single]) or [ ].
• When you press , you can change the settings of each drive mode. Note,
however, that you cannot change the settings of [Single].
To Next Page
Loading...
