46
SQW0419
Basics
Buttons/Dials/Levers Used for Recording
[DISP.] button (Switching the display information)
1
Press [DISP.] button to switch the display
• If the information on the screen is not displayed any longer
because no operation was performed for some time, press the
[DISP.] button or touch the screen to display the information
again.
During recording
You can use [Monitor Disp. Style] and [LVF Disp.Style] in the [Custom] menu to select
either [ ] (Monitor style display layout) or [ ] (Live View Finder style display layout)
for the display screen of the monitor and viewfinder.
■
[ ] Monitor style display layout (Example of monitor style display)
With information Without information
With information
+
level gauge
Without information
+
level gauge
60
p
60
p
Turned off
Monitor recording
information screen
*
■
[ ] Live View Finder style display layout (Example of viewfinder style display)
With information
(Detailed information) With information
With information
(Detailed information)
+
level gauge
With information
+
level gauge
60
p
60
p
*
This screen is displayed only when [Monitor Info. Disp.] in the [Custom] menu is set to [ON].
(→48) Settings can be adjusted directly by touching each of the items displayed on the screen.
To Next Page
Loading...
