157
SQW0419
Adjusting the focus and brightness (exposure)
Setting the ISO Sensitivity
Setting the upper limit of ISO Sensitivity
Recording mode:
You can set the upper limit of ISO sensitivity when ISO sensitivity is set to [AUTO] or
[ ].
→ [Rec] → [ISO Limit Set]
Settings: [200] / [400] / [800] / [1600] / [3200] / [6400] / [OFF]
●
This function is not available in the following cases:
• [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Handheld Night Shot]
(Scene Guide Mode)
• During motion picture recording
Setting the incremental value of ISO Sensitivity
Recording mode:
You can change the setting to increase ISO sensitivity by 1 EV or 1/3 EV.
→ [Rec] → [ISO Increments]
[1/3EV]
[100] / [125] / [160] / [200] / [250] / [320] / [400] / [500] / [640] / [800] / [1000] / [1250] /
[1600] / [2000] / [2500] / [3200] / [4000] / [5000] / [6400]
[1 EV] [100] / [200] / [400] / [800] / [1600] / [3200] / [6400]
●
When this setting is changed from [1/3EV] to [1 EV], the setting for ISO sensitivity may be
changed. (The closest ISO sensitivity that can be set for [1 EV] will be used.)
To Next Page
Loading...
