292
SQW0419
Wi-Fi
About connections
If you have selected [New Connection], select the Wi-Fi function and sending destination,
and then select the connection method.
If you are connecting with the same settings as used previously, you can quickly start
using the Wi-Fi function by connecting with [Select a destination from History] or [Select a
destination from Favorite].
This section describes connection methods.
• When connecting with the same settings as used previously, refer to (→297).
When a screen similar to the one below is displayed, select a connection method.
• Example of operation for displaying a screen:
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] → [Smartphone]
Wireless access point
Connection method Description
[Via Network] Connects through a wireless access point. (→293)
[Direct] Your device connects directly to this unit. (→296)
If you are out and unable to use your wireless access point, or temporarily connecting to
equipment you do not ordinarily use, or in a similar situation, it is convenient to make a
direct connection.
To Next Page
Loading...
