169
SQW0419
Shutter and Drive Settings
Recording 4K Photos
Selecting pictures from 4K burst file and saving
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its
shutter speed, aperture and ISO sensitivity information.
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to
play back only 4K burst files and pictures created from them.
4K burst files recorded with [ ] ([4K Burst]) or [ ] ([4K Burst(S/S)])
1
Select a 4K burst file on the playback screen, and
press
• [ ] is displayed on a 4K burst file.
• The same operation can be performed by touching [
].
• The slide view screen for selecting pictures will be displayed. It
takes a few seconds until the screen is displayed.
2
Touch and drag the frames to select the frame you
want to save as a picture
• You can also perform the same operation by pressing .
When you select pictures from a 4K burst file with a long burst time, we
recommend that you make a rough selection of scenes using the 4K burst
playback screen (→172) first, and then select the frame to be saved as a picture
using the slide view screen.
To Next Page
Loading...
