197
SQW0419
Functions for specific subjects and purposes
Displaying the appropriate screen for specific recording conditions
●
If there is overexposure, we recommend taking pictures using a lower exposure value (→154),
using the histogram (→47) as a guideline.
●
The displayed zebra pattern is not recorded.
●
If you set [Zebra Pattern] to [Fn Button Set] (→61) in the [Custom] menu, every time you press
the assigned function button the setting will switch in the following order: [Zebra 1] → [Zebra 2]
→ [Zebra OFF]. When [Zebra 2] is set to [OFF], you can switch the setting quickly in the following
order: [Zebra 1] → [Zebra OFF].
Setting a monochrome display for the recording screen
([Monochrome Live View])
Recording mode:
You can display the recording screen in black and white. This function is useful when a
black and white screen will make it easier to adjust focus in Manual Focus mode.
→ [Custom] → [Monochrome Live View]
Settings: [ON] / [OFF]
• Even if you use the HDMI output during recording, this function will not work for the
connected device.
• This does not affect recorded pictures.
To Next Page
Loading...
