223
SQW0419
Recording motion pictures
Recording Snap Movies
■
Touch operation
Touch a subject (first position), drag your finger to the desired location (second
position), and release the finger.
• Auto Focus will work to set the start and end focus of [Pull Focus]. When the setup has failed, the
frame returns to the first position. Perform the setup again.
• To cancel the frame settings, touch [
].
●
A greater effect can be achieved by creating a striking contrast of focus
between the start and end positions, for example by shifting focus from the
background to foreground, or vice versa.
●
After setting focus, try to keep the distance between the subject and the
camera constant.
●
When [Pull Focus] is set to [ON]
• Auto Focus Mode will be switched to [
], a setting specially designed for [Pull Focus].
• If you take a picture, the Auto Focus operation [
] will take place at the first frame position.
●
To re-adjust the focus while recording a motion picture, press the shutter button halfway after the
[Pull Focus] operation finishes.
●
Even when [Metering Mode] (→158) is set to [ ], the spot metering target does not move with
focus. The target is fixed at the start position (first position) of [Pull Focus].
●
This function is not available in the following cases:
• In Manual Focus
• When using the Digital Zoom
To Next Page
Loading...
