44
SQW0419
Basics
Buttons/Dials/Levers Used for Recording
Side button
If you press the side button in recording, you can use it in the following
two ways:
• Calling the function for supporting the focus operation
• Switching the operation of the side dial
■
Calling the function for supporting the focus operation
In Auto Focus: If you press the side button, the selection
screen for the case when focus is on
a nearby subject (macro recording) is
displayed
*
. (→145)
*
In the Intelligent Auto Mode ([ ] or [ ]), the
AF Tracking function is applicable. (→132)
In Manual Focus: If you press the side button, the Auto Focus starts working
temporarily (One-shot AF). (→149)
■
Switching the operation of the side dial
Set the menu
→ [Custom] → [Side Button Setting] → [F/SS]
Press the side button
• You can rotate the side dial to set the aperture value and shutter speed.
You can switch the setting operation of the side dial each time you press the side button.
Aperture value or shutter speed setting
Focus adjustment (→144, 147)
●
Select [AF /FOCUS] in step to return to the default setting.
●
In the Manual Exposure Mode, you can set the aperture value with the side dial, and the shutter
speed with the rear dial. If you press the [
] button/[Fn1] button, you can switch the setting
operation of both of the dials.
To Next Page
Loading...
