128
SQW0419
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording
condition, you can let the camera automatically adjust focus in various scenes.
1
Set the focus mode lever to [AFS/AFF] or
[AFC]
• The Focus Mode will be set. (→129)
2
Press [ ] button ( )
3
Press to select Auto Focus mode and
press [MENU/SET] (→130)
4
Press the shutter button halfway
• Two “beep” sounds are heard and Auto Focus is
activated.
Four “beep” sounds when focus is not aligned.
• When you take a picture in a dark location, [
] is
displayed for the focus display and it may take longer
to adjust focus than usual.
• If the camera detects stars in the night sky after
displaying [
], Starlight AF will be activated. When
focus is achieved, the focus indication [ ] and AF
areas in focus are displayed.
(Detection with Starlight AF works only for
approximately 1/3 of the center area of the screen.)
Focus display
( When focus is aligned:
illuminated
When focus is not aligned:
flashing)
AF area
( When focus is aligned:
green)
●
When the Focus Mode is set to [AFF] or [AFC].
• A beep will be emitted when focus is first achieved during the pressing halfway.
• If AF Mode is set to [Custom Multi], such as [
] or [ ], the AF area is displayed for a moment
only when focus is achieved for the first time by pressing the shutter button halfway.
To Next Page
Loading...
