253
SQW0419
Playing Back and Editing Pictures
Using the [Playback] menu
[Print Set]
Picture/picture no./date printing settings can be made for when printing with DPOF
print-compatible shops or printers. (Contact the local photo printing store or read
operating instructions of the printer to check if DPOF is supported.)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
1
Set the menu
→ [Playback] → [Print Set] → [Single] or [Multi]
2
Select a still picture (→236)
3
Use to set number of still pictures and press [MENU/SET] (up to 999
pictures)
(Repeat steps
2
and
3
when using [Multi])
• Date print setting/release → Press
.
■
To clear all
In step
1
, select [Print Set] → [Cancel] → [Yes], and then press [MENU/SET]
●
When you have performed [Print Set] for pictures in a group, printing settings are made for the
total of number of pictures set in that group. If the total number of pictures is 1,000 or higher,
[999+] is displayed.
●
When you perform [Print Set] for a picture in a group, the number of pictures set and the total
number of pictures are displayed with the Print Set icon of the first picture.
●
Date print setting cannot be made for pictures with a [Text Stamp] applied.
●
Depending on the type of printer, the printer settings may take priority over camera settings.
●
Some DPOF information (print settings) set by other equipment cannot be used. In such cases,
delete all of the DPOF information and then set it again with this camera.
●
This function is not available in the following cases:
• Motion pictures
• 4K burst files
• Still pictures recorded with the [Quality] setting [
]
• Cannot be set for files that are not compliant with the DCF standard
To Next Page
Loading...
