141
SQW0419
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
Setting the AF area position with the touch pad
Recording mode:
You can move the AF area displayed on the viewfinder by
touching the monitor.
• If you touch the monitor when the Auto Focus Mode is set to
[Custom Multi] such as [ ], the AF area setting screen will
be displayed. (→134)
→ [Custom] → [Touch Settings] → [Touch Pad AF]
[EXACT] Moves the AF area of the viewfinder by
touching a desired position on the touch
pad.
[OFFSET] Moves the AF area of the viewfinder
according to the distance you drag the
touch pad (→52).
[OFF] —
• Press the shutter button halfway to determine the focus position. If you press the
[DISP.] button before determining the focus position, the focus position returns to the
center.
• To cancel the settings for the AF area when the Auto Focus Mode (→130) is set to [ ]
(Face/Eye Detection), [ ] (AF Tracking), or [ ] (49-area-focusing), press [MENU/
SET].
●
The Touch Shutter function (→54) is disabled when using [Touch Pad AF].
●
[Touch Pad AF] is not available when [Pull Focus] in [Snap Movie] is set to [ON].
To Next Page
Loading...
