269
SQW0419
Wi-Fi
Operating the camera by connecting it to a smartphone
Sending pictures in the camera to social networking services
1
Connect to a smartphone (→261)
Switch the
location of the
pictures to be
displayed
2
Operate the smartphone
Select [ ]
• You can switch a picture to be
displayed using the icon at the top
left on the screen. Select [LUMIX] to
display a picture saved in the camera.
Press and hold the picture and drag
it to send it to the social networking
service, etc.
• The picture will be sent to the social
networking service or other WEB
services.
• Functions can be assigned to the top, bottom, left and right as you wish.
Adding location information to pictures in the camera from a
smartphone
You can send the location information acquired from a smartphone to the camera. After
the information is sent, you can write it on the pictures in the camera.
• You can also use [Location Logging] in the [Playback] menu to write the sent location
information to the pictures.
GPS
Starts location information recording
Start the recording
Ends location information recording
Sends and writes the location
information
• Location information that is different from the information acquired during recording may
be written. Take care regarding the following matters.
– Set [Home] of [World Time] of the camera to your home area.
– Once a smartphone starts recording the location information, do not change the
[Home] setting of [World Time] of the camera.
• The location information cannot be written to pictures recorded without setting [Clock
Set].
To Next Page
Loading...
