332
SQW0419
Others
Message displays
The following explains the meaning of major messages displayed on the monitor or
viewfinder, and how to respond to them.
■
Memory cards
[Memory Card Error] [Format this card?]
• The card format cannot be used with this camera.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→30)
• Try with a different card.
[Insert SD card again] [Try another card]
• Access to card has failed.
→ Insert card again.
• Try with a different card.
[Read Error] / [Write Error] [Please check the card]
• Data read has failed.
→ Check whether card has been inserted correctly (→28).
• Data write has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
• Card may possibly be damaged.
→ Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
• The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion
picture. 4K photo recording requires a card that meets a particular speed class rating. Use a card
that meets the rating. Be sure to use a card of the recommended speed class. For details, refer to
“About motion picture/4K photo recording and speed class ratings” (→29).
→ If recording stops even when using a card of the recommended speed class (→29), the data
writing speed has dropped. If this happens, we recommend backing up the data on the memory
card and formatting it (→30). Depending on the type of the card, recording may stop in the
middle.
[Memory Card Error] [This memory card cannot be used]
• Not compatible with the camera. Use a compatible card. (→29)
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
• Format the card after saving necessary data on a PC etc. (→30)
→ Insert a different card.
To Next Page
Loading...
