138
SQW0419
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
When selecting [ ] / [ ]
You can change the position and size of the AF area.
Press [ ] button ( )
Select [ ] or [ ] and press
• The AF area setting screen appears.
• You can also display the AF area setting screen by touching
the screen.
To change the AF area
Button operation Touch operation Description
Touch To move the position of the AF area.
Pinch in / Pinch out Enlarges/reduces the AF area in small steps.
— Enlarges/reduces the AF area in large steps.
[DISP.] [Reset]
Resets the AF area back to the center.
• If you press the button again, the frame size will
be reset to the initial setting.
• If you set the AF area to an eye in the yellow frame when [
] is selected, the eye to be used
for focusing will be changed.
Press [MENU/SET]
• AF area with the same function as [ ] is displayed in the touched position, when the [ ] is
selected. Setting of the AF area is cleared when [MENU/SET] is pressed or [
] is touched.
■
When selecting [ ]
You can set the focus position by selecting an AF area group. The
AF area, which is configured with 49 points, is divided into groups
consisting of 9 points each (6 points or 4 points for the groups
located at the edges of the screen).
Examples of group
Press [ ] button ( )
Select [ ] and press
• The AF area setting screen appears.
Press to select an AF area group
• You can also select a group by touching the screen.
Press [MENU/SET]
• Only the [+] indications (center points of the selected group) remain on
the screen.
• Setting of the AF area is cleared when [MENU/SET] is pressed or [
]
is touched.
To Next Page
Loading...
