166
SQW0419
Shutter and Drive Settings
Recording 4K Photos
4
Record a 4K photo
• Recording with [ ] ([4K Burst]) (→167)
• Recording with [ ] ([4K Burst(S/S)]) (→167)
• Recording with [ ] ([4K Pre-Burst]) (→168)
• When you perform 4K burst photo recording, a 4K burst file will be saved in the
MP4 format.
• When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display
the recording screen.
■
To cancel the 4K Photo functions
In step
2
, select [ ] ([Single]) or [ ].
Battery drainage and camera temperature
●
If the surrounding temperature is high, or 4K photos are recorded continuously, or the
temperature of the camera rises, [ ] may be displayed and recording may be stopped
halfway through to protect the camera. Wait until the camera cools down.
●
When the drive mode is set to [4K PHOTO] and [4K PHOTO] is set to [ ] ([4K
Pre-Burst]), the battery drains faster and the camera temperature rises. Select
[ ] ([4K Pre-Burst]) only when recording.
To Next Page
Loading...
