183
SQW0419
Functions for specific subjects and purposes
Taking pictures automatically at set intervals [Time Lapse Shot]
4
Press the shutter button fully
• The recording starts automatically.
• During recording standby, the camera turns off automatically when no operation
is performed for a preset interval. The [Time Lapse Shot] recording will continue
even if the camera is turned off, and the camera is automatically turned on at the
recording start time. If you want to turn on the camera manually, press the shutter
button halfway.
• Operations during recording standby (The camera is turned on)
Button
operation
Touch
operation
Description
[Fn2]
Displays a selection screen that lets you pause or stop the
recording
Displays a selection screen that lets you resume or stop the
recording (during pause)
5
Select the motion picture creation method
• [Rec Format]: [MP4]
[Rec Quality]
Sets the picture quality of the motion picture.
[4K/30p] / [4K/24p] / [FHD/60p] / [FHD/30p] / [HD/30p] / [VGA/30p]
[Frame Rate]
Set the number of frames per second. When you set a higher number, you
can create a more seamless animation.
[60fps]
*
/ [30fps] / [15fps] / [10fps] / [7.5fps] / [6fps] / [3fps] / [1fps]
*
Only available with [FHD/60p] setting
• You can set the number of frames to [24fps], [12fps], [8fps], [6fps], [4.8fps],
[2.4fps], or [1fps] when [Rec Quality] is set to [4K/24p].
[Sequence]
[NORMAL]: Stitches the still pictures in the recording sequence.
[REVERSE]: Stitches the still pictures in the reverse order of recording.
6
Use to select [OK] and press [MENU/SET]
• You can also create a motion picture using [Time Lapse Video] in the [Playback]
menu. (→248)
To Next Page
Loading...
