209
SQW0419
Stabilizer, Zoom and Flash
Setting the Flash Functions
2
Press to select the item and press [MENU/SET]
: [Forced Flash On]
: [Forced On/Red-Eye]
*
Always takes pictures using the flash.
• Ideal for taking pictures with a backlight or when a
subject is located under bright lighting such as a
fluorescent light.
: [Slow Sync.]
: [Slow Sync./Red-Eye]
*
Takes brighter pictures such as pictures of subjects
against a nightscape by decreasing the shutter speed
when firing a flash.
• Ideal for taking pictures of people against a
nightscape.
• Using a slower speed can cause motion blur. We
recommend using a tripod.
: Forced Flash Off
Always takes pictures without flash under all recording
conditions.
• Ideal for taking pictures where the use of flash is
prohibited.
• This item is available only when using an external flash.
*
This is available only when [Wireless] in the [Flash] is set to [OFF] (→213) and [Firing Mode] is
set to [TTL] (→208).
Two flashes will be emitted. Do not move until after the second flash. Interval between
flashes varies according to brightness of subject.
• The red-eye reduction effect varies depending on the subject and is affected by factors such
as distance from the subject and whether the subject is looking at the camera during the
preliminary flash. In some cases, red-eye reduction may be negligible.
■
Reducing red-eye
Recording mode:
Automatically detects red-eye and corrects still picture data when recording with flash
red-eye reduction ([ ], [ ]).
→ [Rec] → [Red-Eye Removal]
Settings: [ON] / [OFF]
●
When this function is set to [ON], the flash icon changes to [ ]/[ ].
●
Depending on the circumstance, it may not be possible to correct red-eye.
To Next Page
Loading...
