51
SQW0419
Basics
Buttons/Dials/Levers Used for Recording
■
Automatic switching between viewfinder and monitor
For automatic switching between the viewfinder and monitor, the eye sensor
automatically switches the display to viewfinder when your eye or an object moves
close to the viewfinder.
• The eye sensor may not work correctly depending on the shape of your eyeglasses,
the way you hold the camera, or whether the eyepiece and nearby area are exposed
to strong light. In this case, press the [LVF] button to switch the display.
• During motion picture playback or Slide Show, the eye sensor will not automatically
switch the display to the viewfinder.
Setting the sensitivity of the eye sensor or setting to switch the
display between the viewfinder and monitor
→ [Custom] → [Eye Sensor]
[Sensitivity]
Use this setting to set the sensitivity of the eye sensor.
[HIGH] / [LOW]
[LVF/Monitor Switch]
Use this setting to switch the display between the viewfinder and monitor.
[LVF/MON AUTO] (Automatic switching between viewfinder and
monitor) / [LVF] (Viewfinder display) / [MON] (Monitor display)
• After the display is switched using the [LVF] button, the setting of [LVF/
Monitor Switch] will also change.
Adjusting/not adjusting the focus automatically when the eye sensor
is activated
→ [Custom] → [Eye Sensor AF] → [ON] / [OFF]
• Even when [Eye Sensor AF] is set and the camera automatically adjusts the focus, a
beep will not sound.
• [Eye Sensor AF] may not work when the lighting is low.
To Next Page
Loading...
