Menu Settings
111
VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display (The picture is
automatically rotated and displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
• The pictures are displayed without
being rotated when you select [OFF].
2 Press [MENU/SET] to close the
menu.
• Pictures recorded holding the camera
vertically are automatically displayed
vertically.
∫ Rotate
(The picture is rotated manually.)
1 Press 2/1 to select the picture
and then press 4.
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Protected pictures cannot be rotated.
2 Press 3/4 to select the direction
to rotate the picture and then
press [MENU/SET].
3 Press [MENU/SET] twice to close
the menu.
∫ Example
When rotating clockwise ( )
Original
picture
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
MENU
/SET
MENU
/SET
The picture rotates clockwise in
steps of 90o.
The picture rotates
counter-clockwise in steps of 90o.
MENU
/SET
VQT1G28ENG_L10KP.book 111 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
