Preparation
32
VQT1G28
[FORMAT]
Press [ ] to display the [SETUP] menu
and select the item to set. (P26)
It is not usually necessary to format a card.
Format it when the message [MEMORY
CARD ERROR] appears.
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a sufficiently charged battery (P18) or
the AC adaptor (P128) when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write-Protect switch is set to [LOCK].
• If the card cannot be formatted, consult
your nearest Service Center.
Switching between the
Viewfinder Display/
Live View Display
∫ Screen display in program AE mode
[ ] (at the time of purchase) (P35)
Viewfinder Display
1 AF frame (P35, 37)
2 AF-LED (P106)
3 ISO sensitivity (P78)
• Lights when the ISO is set to other
than [AUTO].
4 Exposure compensation value (P44)
5 Number of recordable pictures
• You can display up to 99 pictures only
on the Viewfinder.
6 Metering mode (P81)
7 Focus (P39)
8 Shutter speed (P37, 42)
9 Aperture value (P37, 41, 42)
MENU
/SET
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
ISO
ISO
5
8
9
4
3
2
1
7
6
VQT1G28ENG_L10KP.book 32 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
