Menu Settings
96
VQT1G28
Press [ ] to display the [REC] mode
menu and select the item to set. (P26)
This mode detects jitter and compensates
for it.
• Check that the [O.I.S.] switch on the lens
is set to [ON].
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– When using the digital zoom.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• You cannot select [OIS MODE] in the
following cases.
– When using a lens that does not have an
optical image stabilizer function
– When auto mode [ ] is selected
• The panning effect in [MODE3] is more
difficult to achieve in the following cases.
– In brightly lit places such as in broad
daylight on a summer’s day
– When the shutter speed is faster than1/100th
of a second.
– When you move the camera too slowly
because the subject is moving slowly.
(The background will not become a blur.)
– When the camera does not keep up with
the subject satisfactorily
• We recommend taking pictures with the
Viewfinder when panning in [MODE3].
[OIS MODE]
Optical Image Stabilizer
[MODE1]
()
Camera shake is corrected at
all times in the mode for
taking pictures. It enables you
to take pictures with stability
after deciding on the
composition using the
telephoto function.
[MODE2]
()
Camera shake is corrected
when the shutter button is
pressed. The resulting
correction is more effective.
[MODE3]
()
Camera shake is corrected for
up/down movements. This
mode is ideal for panning (a
method of taking pictures
which involves turning the
camera to track the
movements of a subject which
continues to move in a fixed
direction).
MENU
/SET
VQT1G28ENG_L10KP.book 96 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
