Menu Settings
116
VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can enlarge and then clip the important
part of the recorded picture.
1 Press 2/1 to select the picture
and then press 4.
2 Enlarge or decrease the parts to
be trimmed with the rear dial.
3 Press 3/4/2/1 to move the
position of the part to be trimmed.
4 Press shutter button.
• The message [DELETE ORIGINAL
PICTURE?] appears.
5 Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
• The picture is overwritten when you
select [YES]. The trimmed pictures
cannot be restored when they are
overwritten.
• A trimmed picture is newly created
when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a trimmed picture.
6 Press [MENU/SET] twice to close
the menu.
• The following pictures cannot be trimmed.
– Pictures recorded when the quality is set
to [RAW], [RAWiFine] or
[RAWiStandard]
• Depending on the cut size, the picture size
of the trimmed picture may become
smaller than that of the original picture.
• The picture quality of the trimmed picture
will deteriorate.
• It may not be possible to trim pictures
recorded with other equipment.
[TRIMMING]
Enlarging a picture and trimming it
MENU
/SET
MENU
/SET
VQT1G28ENG_L10KP.book 116 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
