Advanced
62
VQT1G28
∫ About AF area selection
You can select the AF area when [ ],
[ ] or [ ] is selected.
1 Set the focus to [AFS].
2 Press 2 ().
3 Press 2/1 to select AF mode and
then press 4.
4 Move the AF area with 3/4/2/1.
5 Press [MENU/SET] to close.
When selecting [ ] or [ ]
You can select 1 AF area from the
11 areas.
• The spot metering target can also be
moved to match the AF area when using
[].
When selecting [ ]
You can select the AF area frame as shown
in the following illustration by pressing 3/
4/2/1.
• You can also use the front dial or the rear
dial to select the AF area frame.
1 Set the focus mode lever to [MF].
Manual focus when taking
pictures with Live View
VQT1G28ENG_L10KP.book 62 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
