Basic
48
VQT1G28
Playing Back Pictures
1 Press [ ].
2 Press 2/1 or rotate the front dial
to select the picture.
2/ : Play back the previous picture
1/ : Play back the next picture
• The first recorded picture will be
displayed after the last recorded
picture.
• When [ROTATE DISP.] is set to [ON],
pictures recorded by holding the
camera vertically are played back
vertically. (P111)
(You can only use this when using a
lens that supports the direction
detection function. (P13))
• If you press and hold 2/1, you can
play back the pictures in succession.
∫ To finish playback
Press [ ] again or press the shutter
button halfway.
• This camera is based on the DCF
standard “Design rule for Camera File
system” which was established by the
“Japan Electronics and Information
Technology Industries Association
(JEITA)”.
• The LCD monitor may not be able to
display the details of the recorded
pictures. You can use the playback zoom
(P51) to check the details of the pictures.
• If you play back pictures that have been
recorded with other equipment, the picture
quality may deteriorate. (The pictures are
displayed as [THUMBNAIL IS
DISPLAYED] on the screen.)
• If you change a folder name or file name
on your PC, the pictures may not play
back on the camera.
• If you play back a non-standard file, the
folder/file number is indicated by [—] and
the screen may turn black.
Press [DISPLAY] to switch the
monitor screen.
A [DISPLAY] button
B LCD monitor
• The [DISPLAY] button is not activated
when the menu screen is displayed.
You can only select Normal display or
No display in playback zoom (P51) and
during a slide show (P109).
or
Changing the Information
Displayed on the playback screen
B
A
VQT1G28ENG_L10KP.book 48 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
