Advanced
60
VQT1G28
Reset [LIVE VIEW AF] (P107) in the
[CUSTOM MENU] menu to [ ] if it is set
to [ ].
Select the mode that matches the
recording conditions and the composition.
1 Set the focus mode lever to [AFS].
2 Press 2 ().
3 Press 2/1 to select AF mode and
then press [MENU/SET] to close.
• You can also use the front dial or the
rear dial to select.
• You can also press the shutter
button halfway to close.
AF mode when taking pictures
with Live View
Setting the method used to focus
MENU
/SET
Face detection:
The camera
automatically detects the
person’s face. The focus
can then be adjusted to
fit that face no matter
what portion of the picture it is in.
9-area-focusing:
The camera focuses on
any of 9 focus areas.
This is effective when
the subject is not in the
center of the screen.
Multi-area-focusing:
The camera focuses on
any of the selected
areas. This is effective
when the subject is not
in the center of the
screen.
3-area-focusing:
The camera focuses on
any of 3 focus areas
points – left, right or
center. This is effective
when the subject is not
in the center of the screen.
1-area-focusing:
The camera focuses on
the subject in the AF
area on the center of
the screen.
Spot-focusing:
The camera focuses on
a limited narrow area in
the screen.
VQT1G28ENG_L10KP.book 60 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
