Advanced
80
VQT1G28
• The camera may not be able to detect the
movement of the subject in the following
cases.
– When the moving subject is small
– When the moving subject is at the edge
of the screen
– When the subject starts moving the
instant the shutter button is pressed fully
– While AF is activated
• The setting is fixed to [ ] in the
following cases.
– In [BABY1]/[BABY2] and [PET] in scene
mode
– In [INDOOR PORTRAIT], [I.ISO
MACRO], [NORMAL SPORTS],
[OUTDOOR SPORTS] and [INDOOR
SPORTS] in advanced scene mode
• Program shift cannot be activated when
the ISO sensitivity is set to [ ].
• You cannot select [ ] in shutter-priority
AE mode and manual exposure mode.
Also, you cannot select [AUTO] in manual
exposure mode.
• To avoid picture noise, we recommend
reducing the ISO sensitivity, setting
[NOISE RED.] in [FILM MODE] towards
[_] or setting the items except
[NOISE RED.] towards [`] to take
pictures. (P93)
If you set a maximum setting for the ISO
sensitivity, the camera automatically
changes to the optimal ISO sensitivity for
the brightness of the subject.
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select [ISO
LIMIT SET] in the [CUSTOM
MENU] menu [ ] and then
press 1.
3 Press 3/4 to select the ISO
sensitivity and then press [MENU/
SET].
• You can also use the front dial or the
rear dial to select a menu item.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
Setting the maximum sensitivity
setting
MENU
/SET
VQT1G28ENG_L10KP.book 80 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
