Preparation
24
VQT1G28
Turning the Camera On
Set the camera ON/OFF switch to
[ON].
• The status indicator A lights when you set
the switch to [ON]. The status indicator
blinks if the remaining battery power
becomes low.
• The camera turns off when you set the
switch to [OFF].
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
A [MENU/SET] button
B Cursor buttons
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
date and time.
A Time at the home area
B Time at the travel destination (P129)
• You can also use the front dial or the
rear dial to set.
Dust reduction function
When the camera is turned on, the dust
reduction function is automatically
activated to shake off any dust on the front
part of the image sensor.
A
2/1: Select the desired item.
3/4: Set the display order for the
date and time.
: Cancel without setting the
clock.
A
B
:
:
VQT1G28ENG_L10KP.book 24 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
