Panasonic Lumix DMC-L10 - [Sunset]; [Food]; [Baby1];[Baby2]

Advanced
89
VQT1G28
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P88)
Select this when you want to take pictures
of a sunset. This allows you to take vivid
pictures of the red color of the sun.
• The flash setting is fixed to Forced OFF
[].
• The setting on the AF assist lamp is
disabled.
• The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P88)
This mode allows you to take pictures of
food with a natural hue without being
affected by the ambient light in restaurants
etc.
• The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P88)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
You can set different birthdays in [BABY1]
and [BABY2]. You can then display the
ages when playing back the pictures.
• The age of the baby can be printed out
using the [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] software on
the CD-ROM (supplied). [For details on
printing, refer to the operating instructions
(PDF file) of the software.]
∫ Age display setting
• To have the age displayed, first set the
birthday and then be sure to set
[WITH AGE] before taking the pictures.
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When a message appears, press 2/1
to select items (Year/Month/Day) and
then press 3/4 to set them.
3 Press [MENU/SET] to finish the setting.
• You can also use the front dial or the
rear dial to set.
• Intelligent ISO sensitivity control is
activated, and maximum ISO sensitivity
level becomes [ISO400], in [BABY1]/
[BABY2] (When taking pictures with Live
View only).
• The age and the current date and time are
both displayed for about 5 seconds when
the camera is turned on in [BABY1]/
[BABY2].
•
The age display style differs depending on
the language setting in the recording mode.
• If the age is not properly displayed, check
the clock and birthday settings.
• If the camera is set to [WITHOUT AGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even if camera is set
to [WITH AGE] after taking the pictures.
• You can reset the birthday setting with
[RESET].
• Digital zoom cannot be used.
• The initial setting for [AF] when taking
pictures with Live View is face detection.
[SUNSET]
[FOOD]
[BABY1]/[BABY2]
MENU
/SET
MENU
/SET
1
2
MENU
/SET
VQT1G28ENG_L10KP.book 89 ページ ２００７年９月６日 木曜日 午前９時２９分