Advanced
79
VQT1G28
¢ When taking pictures with Live View
only
• You can set [ISO LIMIT SET]. (P80)
• When setting to [AUTO], the ISO
sensitivity is automatically increased
between [ISO100] and [ISO400]
according to the brightness. (It can only
increase up to [ISO200] when [ISO LIMIT
SET] is set to [ISO200].)
• The ISO sensitivity automatically
increases up to [ISO800] if you select
[].
∫ About [ ] (Intelligent ISO
sensitivity control)
(When taking pictures with Live View
only)
The camera detects the movement of the
subject near the center of the screen and
then sets the optimal ISO sensitivity and
shutter speed according to the movement
and the brightness of the subject.
• Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
• Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
• The shutter speed is not fixed when the
shutter button is pressed halfway. It is
continuously changing to match the
movement of the subject until the shutter
button is pressed fully. Confirm the actual
shutter speed on the information display
for the picture being played back.
• You can also use [FUNC] to set. (P91)
• If you select [ ], digital zoom cannot be
used.
• Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided even if [ ] is selected.
ISO sensitivity 100 1600
Use in bright
places
(e.g. outdoors)
Suitable
Not
suitable
Use in dark
places
Not
suitable
Suitable
Shutter speed Slow Fast
Noise Less Increased
ISO sensitivity Settings
AUTO
The ISO sensitivity is
automatically adjusted
according to the
brightness.
¢
(Intelligent)
The ISO sensitivity is
adjusted according to
the movement of the
subject and the
brightness.
100 The ISO sensitivity is
fixed to various
settings.
200
400
800
1600
1/125 ISO800
1/30 ISO200
VQT1G28ENG_L10KP.book 79 ページ ２００７年９月６日 木曜日 午前９時２９分
To Next Page
Loading...
