157
SQW0566
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
When selecting [ ] / [ ]
You can change the position and size of the AF area.
Set the menu
→ [Rec] → [AF Mode]
Select [ ] or [ ] and press
• The AF area setting screen appears.
• You can also display the AF area setting screen by touching
the screen.
To change the AF area
Operation Touch operation Description
Touch To move the position of the AF area.
—
Pinch out /
Pinch in
Enlarges/reduces the AF area in small steps.
— Enlarges/reduces the AF area in large steps.
[DISP.] [Reset]
Resets the AF area back to the centre.
• If you press the button again, the frame size will
be reset to the initial setting.
• If you set the AF area to an eye in the yellow frame when [
] is selected, the eye to be used
for focusing will be changed.
Press [MENU/SET]
• AF area with the same function as [ ] is displayed in the touched position, when the [ ] is
selected. Setting of the AF area is cleared when [MENU/SET] is pressed or [
] is touched.
To Next Page
Loading...
