Panasonic Lumix DMC-ZS110

250
SQW0566
Stabiliser, Zoom and Flash
Setting the Flash Functions
Adjusting the flash output
Recording mode:
Adjust the flash output if a picture taken using the flash is too bright or too dark.
1
Set the menu
TZ110/ZS110
→ [Rec] → [Flash] → [Flash Adjust.]
TZ80/ZS60
→ [Rec] → [Flash Adjust.]
2
Press to set the flash output and press [MENU/SET]
Settings: -2 EV to +2 EV (unit: 1/3 EV)
When you do not want to adjust the intensity of the flash, select [±0 EV].
●
When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash icon.