79
SQW0566
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Monitor Display] / [Viewfinder]
Adjust brightness and colour of the monitor or viewfinder.
Settings
[Brightness]
Adjusts the brightness.
[Contrast]
Adjusts the contrast.
[Saturation]
Adjusts the vividness of colours.
[Red Tint]
Adjusts red hues.
[Blue Tint]
Adjusts blue hues.
1
Press to select the setting item and press to make adjustments
•
You can also make adjustments with the rear dial.
•
You can also make adjustments with the control dial.
2
Press [MENU/SET]
●
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
To Next Page
Loading...
Need help?
General
