Panasonic Lumix DMC-ZS110

51
SQW0566
Basics
Buttons/Dials/Levers Used for Recording
TZ80/ZS60
Control ring / Control dial
The “Control Ring/Control dial” is an easy and convenient way to adjust several settings,
depending on the camera mode selected. You can use the control ring ( )/control dial
( ) to change the settings of the unit.
Items that can be set by the control ring/control dial vary depending on recording modes.
Following are the pre-assigned settings.
Mode dial
Control ring
*
1
Control dial
[
] (→88)
Step Zoom (→239)
—
[
] (→97)
Programme Shift (→97)
[
] (→101)
Aperture adjustment (→101)
[
] (→102)
Shutter speed adjustment (→102)
[
] (→103)
Aperture adjustment
*
2
(→103) Shutter speed adjustment
*
2
(→103)
[
] (→109)
Picture effects change (→117)
[
] (→112)
Aperture adjustment
*
3
(→103) / Shutter speed adjustment
*
4
(→103)
[
] (→117)
Picture effects change (→117)
*
1
When Manual Focus is set, the control ring is assigned to focus adjustment. (→167)
*
2
Press to switch between shutter speed adjustment and aperture adjustment.
*
3
The operation is possible only when the Scene Guide Mode is set to [Appetizing Food].
*
4
The operation is possible only when the Scene Guide Mode is set to [Artistic Nightscape].
• The control ring/control dial can be used to change to your preferred settings. (→75)