80
SQW0566
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
Settings
The brightness is adjusted automatically depending on how bright it is around the camera.
The brightness is increased.
The brightness is standard.
The brightness is decreased.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
[ ] returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press
any button or touch the screen to make the screen brighter again.)
●
Setting [ ] or [ ] reduces the operating time.
●
Cannot select [ ] during playback.
●
When the AC adaptor (optional) and DC coupler (optional) are used, the initial setting is [ ].
To Next Page
Loading...
Need help?
General
