287
SQW0566
Playing Back and Editing Pictures
Using the [Playback] menu
[Light Composition]
Select multiple frames from 4K burst files recorded in 4K Photo mode (→184) that you
wish to combine. Parts of the image that are brighter than the preceding frame will be
superimposed on the preceding frame to combine the frames into one picture.
1
Set the menu
→ [Playback] → [Light Composition]
2
Using , select the 4K photo burst files and press [MENU/SET]
3
Choose the combining method and press [MENU/SET]
■
When [Composite Merging] is selected
Select the frames you wish to combine, and then camera superimposes brighter parts of the
image.
Select the frames
For button and touch operation, refer to (→193).
• Images displayed cannot be enlarged or shrunk or shown
as in slide view
• [
] in touch operation becomes [ ].
Press [MENU/SET]
The selected frames are remembered, and the display goes
to the preview screen.
Use
to select items and press [MENU/SET] to perform
the following operations.
– [Next]: Lets you select more frames for combining. Goes
back to step
.
– [Reselect]: Discards the frame selected immediately before
and lets you select a different image.
– [Save]: Ends frame selection.
Next
Reselect
Save
Preview
Preview
Repeat steps - to select more frames to combine
• You can select up to 40 frames.
Press to select [Save], and then press [MENU/SET]
To Next Page
Loading...
