175
SQW0566
Adjusting the focus and brightness (exposure)
Taking pictures by locking the focus and/or
exposure
(AF/AE Lock)
Recording mode:
The AF/AE Lock function is convenient, for example, when there is too much contrast with
the subject and you cannot get appropriate exposure (AE Lock) or when you want to take
a still picture composed with the subject outside the AF area (AF Lock).
Preparation
To execute the AF/AE Lock function, it is necessary to register [AF/AE LOCK] to the function button.
(→70)
1
Point the camera at the subject
2
Lock the focus and/or exposure while you press and hold the
function button
• When you release the function button, the focus and/or exposure lock is
cancelled.
3
While you press and hold the function button, move the
camera to compose the picture you want to take and fully
press the shutter button
• When [AE LOCK] is set, press the shutter button halfway to focus, then press it
fully.
Setting the function of the function button where [AF/AE LOCK] is
registered
→ [Custom] → [AF/AE Lock]
[AE LOCK]
Locks exposure only.
• [AEL], aperture value, and shutter speed are displayed when the correct
exposure is achieved.
[AF LOCK]
Locks focus only.
• [AFL], focus, aperture value, and shutter speed are displayed when the subject
comes into focus.
[AF/AE LOCK]
Locks focus and exposure.
• [AFL], [AEL], focus, aperture value, and shutter speed are displayed when the
subject is in focus and the correct exposure is achieved.
[AF-ON] Auto Focus is activated.
Maintaining/not maintaining the lock when the function button where
[AF/AE LOCK] is registered is released
→ [Custom] → [AF/AE Lock Hold] → [ON] / [OFF]
To Next Page
Loading...
