161
SQW0566
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
Setting the AF area position with the touch pad
Recording mode:
You can move the AF area displayed on the viewfinder by touching the monitor.
•
If you touch the monitor when the Auto Focus Mode is set to [Custom Multi] such as
[ ], the AF area setting screen will be displayed. (→153)
→ [Custom] → [Touch Settings] → [Touch Pad AF]
[EXACT] Moves the AF area of the viewfinder by
touching a desired position on the touch
pad.
[OFFSET] Moves the AF area of the viewfinder
according to the distance you drag the
touch pad (→61).
[OFF] —
• Press the shutter button halfway to determine the focus position. If you press the
[DISP.] button before determining the focus position, the focus position returns to the
centre.
• To cancel the settings for the AF area when the Auto Focus Mode (→149) is set to
[ ] (Face/Eye Detection), [ ] (tracking), or [ ] (49-area-focusing), press [MENU/
SET].
●
The Touch Shutter function (→63) is disabled when using [Touch Pad AF].
●
The [Touch Pad AF] does not function in the following cases:
• When [4K Live Cropping] is set
• When [Pull Focus] in [Snap Movie] is set to [ON]
To Next Page
Loading...
