358
SQW0566
Connecting with other devices
Printing
You can connect directly to a PictBridge-compatible printer for printing.
Preparations
• Adjust the print quality or other settings on your printer, as needed.
• Turn on the camera and printer.
1
Connect camera to printer
• Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction,
the plug could become deformed and cause faulty operation) Also, do not insert into the wrong
socket. Doing so may cause damage to this unit.
• Do not use any other USB connection cables except the supplied one. Using cables other than
the above may cause a malfunction.
[CHARGE] socket
• [ ]
Do not disconnect the USB connection cable
(supplied) when the cable disconnection icon [
] is
displayed (may not be displayed with some printers).
USB connection cable (supplied)
[CHARGE] socket
• [
]
Do not disconnect the USB connection cable
(supplied) when the cable disconnection icon [
] is
displayed (may not be displayed with some printers).
USB connection cable (supplied)
2
Use to select [PictBridge(PTP)] and press [MENU/SET]
3
Use to select a picture and press [MENU/SET]
4
Use to select [Print start] and press [MENU/SET]
(Print settings (→361))
To Next Page
Loading...
Need help?
General
