229
SQW0566
Functions for specific subjects and purposes
Setting the profile for a baby or pet to record in a
picture
Recording mode:
You can set a name or birthday of a baby or pet before taking a picture to record the
name or age in months/years in the picture.
■
Setting the name and age in months/years
Set the menu
→ [Rec] → [Profile Setup]
Settings: [ ] ([Baby1]) / [ ] ([Baby2]) / [ ] ([Pet]) / [OFF] / [SET]
Use to select [SET] and press [MENU/SET]
Use to select [Baby1], [Baby2] or [Pet] and press [MENU/SET]
Use to select [Age] or [Name] and press [MENU/SET]
Use to select [SET] and press [MENU/SET]
Age: Use to select year, month and day, set with , and press [MENU/SET]
Name: (See “Entering Text”: (→87))
Use to select [Exit] and press [MENU/SET] to finish
■
Cancelling the display of the name and age in months/years
Select [OFF] in step
.
●
[Name] and [Age] print settings can be made on your computer using “PHOTOfunSTUDIO”
software, which you download from a website (→353). Text may also be stamped onto the still
picture using the camera’s [Text Stamp].
●
[Profile Setup] is not available for 4K photo recording or recording in [Post Focus].
●
You cannot record the name or age in months/years in the following cases:
• During motion picture recording
• Still pictures that are taken while recording motion pictures (→261)
To Next Page
Loading...
