302
SQW0566
Wi-Fi
Wi-Fi Function
■
Before Use
• Complete the date and time settings in advance. (→42)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device
equipped with the wireless LAN function is required.
■
Lighting of the Wi-Fi connection lamp when the Wi-Fi function is in use
Lit: When the Wi-Fi function is ON or connected
by Wi-Fi
Blinking: When sending picture data
■
About the [Wi-Fi] button
In this Operating Instructions, a function button to which [Wi-Fi] is assigned is referred
to as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn5] button.)
• For details on the function button, refer to (→70).
To start up the Wi-Fi function:
Touch [ ]
Touch [ ]
To Next Page
Loading...
